kr 4 599,99 -25%

Spesialpris kr 3 449,99

med 25 % kode: TOP25kr 2 587,49

På lager

30 dagers returrett
Forsikret frakt
Kjøperbeskyttelse

Leveranse: 10.07.2025 - 18.07.2025

Sku: A635004-0

Utvidet retur

60 dager i stedet for 30 dager + kr 19,99

Priser ekskl. mva. pluss Frakt

Antall

KODE: TOP25

Gå til slutten av bildegalleri

Gå til begynnelsen av bildegalleri

Sett med styreendespeil par med LED-hovedlys 7" og frontlyshus 7" Zaddox

Set consisting of a pair of motorcycle handlebar end mirrors with LED headlights and lamp housing 7 inches
Scope of delivery: motorcycle mirrors right and left (pair), adapter set 13-21mm, mounting material, lamp housing for 7 inch (17.8 cm) headlights, fork bracket, LED headlights, connection cable (without lamp housing, available separately)
Important: This is a , not adapted to a specific model. In many cases, individual adjustments are required for installation. Please use the dimensions and pictures to check whether installation is possible for the corresponding motorcycle.
Zaddox motorcycle mirror SP6 for easy installation in the handlebar ends
Rear view mirror made of high-quality, CNC-milled aluminum, low weight and high durability
360° Ball joint can be individually adjusted for the optimal viewing angle in any seating position
Mirrors can be mounted both above and below the handlebars (depending on the motorcycle, please note the handlebar angle)
Handlebar end mirrors suitable for practically all handlebars with an outer diameter on the grips of 22-25mm (7/8"-1" inch) and a steering tube inner diameter of 13-21mm
Dimensions: glass length 13.0cm, glass width 8cm, holding arm length 13cm, holding adapter length 3.5cm
With E-mark for legal use on public roads
Note: Handlebar end mirrors with internal clamp for hollow handlebars, not suitable for handlebars with threaded bushing. Please check in advance.
Important: This is a universal article, not adapted to a specific model. In many cases, individual adjustments are required for installation. Please check the dimensions and pictures to see whether installation is possible for the corresponding motorcycle. Installation requires knowledge of motorcycle electrics, if in doubt have it installed by a specialist workshop.
Craftride universal motorcycle headlight housing with 7" inch (17.8cm) diameter and fork bracket
Perfect for choppers, cruisers, cafe racers and individual conversions
With bracket for mounting on the front wheel forks with a diameter of 35-43mm and a width of 21cm
Can also be mounted on existing lamp holders
Made from aluminum, painted black gloss
Suitable for LED and H4 headlight inserts
Dimensions see photo
Headlight inserts available separately, not included
Craftride LED headlight 7" inch for Harley Davidson models
Ideally suited for use as LED main headlight with high beam, low beam and Daytime running light (DLR)
For daytime bright illumination of the road across the entire width
Safety plus and a new look for the bike thanks to the latest LED technology
Headlight cover lens made of polycarbonate, scratch-resistant and highly impact-resistant
UV protected, no blinding or yellowing of the lens even after long periods of use or when left outdoors
Headlight 100% waterproof, no fogging possible
State-of-the-art LED technology guarantees a burn time of several 10,000 hours, so the headlight never needs to be replaced
Exact fit for Harley Davidson headlights with a 7 inch diameter (e.g. Touring and Softail models)
Easy installation in the existing lamp housing, connection plug included (see Photo)
With ECE certification for legal use on public roads
Important: Some models require an adapter ring and cable adapter (Harley No. 67700439 and 69201070), not included
Cable assignment: green: ground, low beam and high beam, red: daytime running light